Perspectives on greener product development and manufacturing from Sustainable Minds, our partners, customers and contributors.

Sustainable Europe

Glass or Ceramic?

By Travis Lee on November 6, 2009

One of our designers here at LUNAR was recently working on a project that required a material with a cold, smooth, high-quality feel, and she asked me which was a more sustainable material, ceramic or glass. This is what I told her:

Glass: There are many different types of glass, but I’ll focus on soda-lime glass here, the type most commonly used in containers, windows, etc. Glass is heavy and often gets a bad rap for that, but if recycled properly it is one of the few infinitely recyclable materials in common use today. It is also one of the few materials with a well-developed recycling infrastructure in almost every developed country. It can be fragile, but can also be made to be durable with various geometries and wall thicknesses (think about how long old Coke bottles stay in circulation). Glass can be considered, for all intents and purposes, to be non-reactive, so it won’t off-gas or leach like plastics.

Sustainable Minds release 1.0 is live!

By Terry Swack on October 28, 2009

It's been a long time in the works. We've been fortunate to develop our extensive and knowledgeable alpha and beta communities, and now very excited that the official release is out and available to everyone.

Re-nourish, re-launched

By Guest contributors on October 18, 2009

This post was submitted by guest contriburor Eric Benson, an Assistant Professor of Graphic Design at the University of Illinois. His research explores how design can be sustainable and consequently how to teach it.

After nearly two years of planning and research, Re-nourish.com has finally relaunched its new site, making it the graphic design industry's only comprehensive resource on sustainable graphic design theory and practice.

Regenerative design gives back more than it takes away

By David Laituri on October 12, 2009

“Meet the needs of the present without compromising the ability of future generations to meet their own needs.” – Report of the World Council on Environment and Development, 1987

This definition of sustainability is powerful in its sheer simplicity: replace what you take, period. Achieving sustainability in practice turns out to be much more challenging and elusive - which is probably why little has been written about what lies beyond sustainable design.

Wood plays a major role in our systems & accessories. It looks great, has awesome sound reproduction and impact resistance characteristics - and it’s eminently renewable. Because of our fundamental commitment to sustainability, we’ve always sought sustainably-managed wood sources near our shops in the Southeast Asia. While our softwoods are locally-sourced and plantation-grown, reliable sources of sustainably-managed hardwoods are harder to come by.

Dashboards and Meters: the Next Blinking 12:00?

By Sandy Skees on September 25, 2009

We are bombarded with data, visuals, advertisements, tweets, updates and videos, so do we really need our products to beep, change colors, add leaves or update graphs? Especially since many people never use all of the functionality built into most products or, worse yet, simply discard the product when its complication oversteps its usefulness?

Recent product design is incorporating dashboards and metering capabilities as consumer features. Prius, Honda, Google Smart Meter, and even Mint.com are examples of products that incorporate a feedback mechanism into the product itself. ‘Hypermiling’ is the term for how to wring every last drop of efficiency from hybrid automobiles and can be found on sites like CleanMGP. While these dashboards provide a clear and powerful way to display data, they introduce a set of design challenges that must integrate social science strategies in order to be most effective.

Sustainable purchasing - the indirect upstream bill

By Joep Meijer on September 13, 2009

When organizations want to improve their triple bottom line1 they usually start with the internal processes. It seems to fit the direct-responsibility focus that makes good managers most successful. Internal processes are within reach, and most easily grasped. Looking at it from a life cycle perspective, the indirect responsibility usually comes later, if at all. However, for some sustainable design solutions the critical area lies in the indirect upstream responsibility.

Indirect responsibility For a lot of products, a major source of environmental and social impact lies in the materials and energy that are purchased. Think about a product made of steel. A whole industry exists whose sole purpose is to roll-form steel into shapes that we need. Their contribution to the overall impact of the steel industry is limited to directly-quantifiable losses (material efficiency) and logistics (transportation efficiency).

Red, blue and green all over: the politics of sustainability

By Jim Hall on September 4, 2009

I’m not one of those people who can say that I’ve always cared about sustainability. My turning point came about four years ago when I toured a landfill and personally saw the obscene amount of waste that society creates each and every day. Somehow I knew intuitively that what I witnessed wasn’t sustainable. I deduced that every paper cup, plastic container, broken glass, diaper and appliance that was being buried embodied natural resources – wasted resources – that were going right into the ground.

Now I find myself in a position in which I can make a difference. I’m fortunate enough to have been exposed to some of the leading minds in the field of sustainability. I’ve attended numerous conferences, seminars, classes, and educational events across the country in order to advance my knowledge and experience. I’ve made new friends and met new colleagues. And they’ve all made me feel like I’m part of the family.

But there’s one thing that continues to perplex me.

Autodesk's Rob Cohee previews Sustainable Minds LCA software

By Sustainable Minds on August 28, 2009

Rob Cohee, Industry Solution Evangelist from Autodesk's Manufacturing Industry Group, has been entertaining the design and manufacturing industry for quite some time with his fun, informative, and sometimes irreverent video demos. Now he takes on green product design using Sustainable Minds LCA software. (Even though Rob's met us, I don't remember wearing my 'steel-toed Birkenstocks' that day. How did he know?)

What's great about Rob's demo is that he shows off the usefulness and ease of use of Sustainable Minds. It's easy to learn and use, but most importantly, it provides meaningful and actionable results. Rob was very quickly able to model the environmental impacts of a wine bottle opener made from aluminum, and based on the results, explore alternative materials (plastic) and end of life methods to improve the environmental performance. Importing the BOM from Autodesk Inventor made the process even faster.

There is no such thing as a 'green' product.
All products use materials and energy, and create waste. There is no explicit definition of what 'green' means. Industry groups and third-party certifiers are working on definitions and standards, but, as yet, there is no standardized set of metrics to qualify a product as 'green.' The best we can do is make products greener than the ones we make today.

Sustainable Minds Makes Life Cycle Analysis Easy

By Guest contributors on August 10, 2009

This post by guest contributor Steve Puma, a sustainability and personal technology consultant, first appeared on Triple Pundit. His personal blog, ThePumaBlog.com, deals with the intersection of sustainability, technology, innovation, and the future.

Paper or plastic? Diesel or hybrid? Extrude or blow-mold? Some of the most difficult problems in designing sustainable products involve making the right choices in materials, processes and transportation methods. However, choosing the options that will actually have a lower environmental impact is much more complex that one would think.

Deciding what metrics to use, where to draw the boundaries and how to compare wildly different materials is a highly involved and technical art known as Life-Cycle Analysis, or LCA. Sustainable Minds, a Boston-based software company, is making LCA much more accessible to designers with its new web-based software service. I was recently able to see the software in action at a seminar entitled, “Mastering Environmental Impact Assessment in the Design Process.”